ft818:aio_box:v1
This is an old revision of the document!
V1 AIO box
This is the first version of the project. The main part is the case, and there is just a top plate to be CNC milled with 3mm Dibond sheet to close it.
It's quite a huge part, the sizes are 155.3×251.5x70mm and the total weight is about 330g printed.
I've printed it with standard PLA, but the green of Dailyfil is quite good and give it a better military feeling, even it's not the right OTAN green.
List of components
| Designation | Qty | Link | Notes |
|---|---|---|---|
| DC socket 5.5mm x 2.1mm | 1 | link | used as the charging port for the battery pack |
| Lithium cells 18650 3300mah | 6 | link | to make a 6600mah 12.6V battery pack |
| XT60 socket with screw mount | 2 | link | one for external power for FT-818 and second one for the RPI4 |
| Lithium charger 2A | 2 | link | to charge the battery pack |
ft818/aio_box/v1.1587930772.txt.gz · Last modified: 2020/04/26 21:52 by f4ija
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
