This is an old revision of the document!
So, you've just received your kit. Please read this page to assemble properly your kit.
You may notice some small differences beetween the pictures and your own kit but it's mostly the same for the build.
If you have some questions, feel free to ask : mailto:adrien.grelet@gmail.com.
The printed parts come with some supports you'll have to remove with a plier and cut the extra material with a well sharpened knife.
On the picture it's just the main zones you'll have supports, but check the entire parts to clean them.
Also, on the CNC parts, even I've checked them, you can have some burrs you can easily remove by filing the edges.
Item | Quantity | Note |
---|---|---|
AIO box | 1 | |
M5 nuts | 5 |
Item | Quantity | Note |
---|---|---|
PLAQUE_DESSOUS | 1 | Base plate in alumium |
Aluminium Heatsing | 1 | |
TFX03/012ZN | 8 | M3 countersunk head, 12mm long |
TFX03/08ZN | 1 | M3 countersunk head, 8mm long |
Item | Quantity | Note |
---|---|---|
DC fan | 2 | with filtered cover |
RJ45 socket | 1 | |
TCX03/08ZN | 2 | M3 standard head, 8mm long |
TCX03/12ZN | 2 | M3 countersunk head, 12mm long |
M3 spacer | 2 | |
M3 nut | 2 |
Item | Quantity | Note |
---|---|---|
Banana ground connector | 1 | |
SO-239 socket | 1 | |
TCX03/016ZN | 8 | M3 standard head, 16mm long |
TFX03/08ZN | 2 | M3 countersunk head, 8mm long |
Item | Quantity | Note |
---|---|---|
16mm spacer | 2 | |
PINCE_REGULATEUR | 1 | printed part |
DC stepdown | 1 | |
Foam | 1 | Piece of foam to protect stepdown |
TFX03/08ZN | 4 | M3 countersunk head, 8mm long |
TCX03/08ZN | 2 | M3 standard head, 8mm long |
M3 spacer | 4 | |
M3 nut | 2 |
Don't forget to screw the thermal switch before installing the RPI !
Item | Quantity | Note |
---|---|---|
Left side plate | 1 | aluminium part |
Right side plate | 1 | aluminium part |
TCX03/08ZN | 8 | M3 standard head, 8mm long |